Tekheniki Parameters
Diameter (mm) | Litekanyo D×L (mm) | Boima (t) | Sekhahla disk | Moqomo oa ho tsamaisa (kN× sete) | Peipi ea ka hare (mm) | ||
Matla (kW× sete) | Torque (Kn·m) | rpm | |||||
Tlhaloso: NPD800 | 1020×3400 | 5 | 75 × 2 | 48 | 4.5 | 260×4 | 50 |
NPD 1000 | 1220×3600 | 6.5 | 15x2 | 100 | 3.0 | 420×4 | 50 |
NPD 1200 | 1460×4000 | 8 | 15x2 | 100 | 3.0 | 420×4 | so |
N PD 1350 | 1660×4000 | 10 | 22 × 2 | 150 | 2.8 | 600×4 | 50 |
NPD 1500 | 1820×4000 | 14 | 30×2 | 150 | 2.8 | 800×4 | 70 |
Tlhaloso: NPD 1650 | 2000×4200 | 16 | 30×2 | 250 | 2.35 | 800×4 | 70 |
NPD 1800 | 2180×4200 | 24 | 30×3 | 300 | 2 | 1000×4 | 70 |
NPD 2000 | 2420×4200 | 30 | 30×4 | 400 | 1.5 | 1000×4 | 80 |
NPD 2200 | 2660×4500 | 35 | 30×4 | 500 | 1.5 | 800×8 | 80 |
NPD 2400 | 2900×4800 | 40 | 37x4 | 600 | 1.5 | 1000×4 | 80 |
NPD 2600 | 3140×5000 | 48 | 37x4 | 1000 | 1.2 | 1200×8 | 100 |
Mochini oa ho jara liphaephe tsa letoto la NPD o loketse haholo maemo a jeoloji a nang le khatello e phahameng ea metsi a ka tlas'a lefatše le coefficient e phahameng ea ho kenella ha mobu. Letlapa le chekiloeng le phunyeletsoa ka ntle ho kotopo ka mokhoa oa seretse ka pompo ea seretse, kahoo e na le litšobotsi tsa ts'ebetso e phahameng ea ho sebetsa le tikoloho e hloekileng ea ho sebetsa.
Ho ea ka litsela tse sa tšoaneng tsa ho laola seretse holim'a ho epolloa holim'a metsi, NPD letoto la lihlooho tse phala jacking mochine ka aroloa ka mefuta e 'meli: ka ho toba mofuta taolo le ka tsela e sa tobang mofuta taolo (moea khatello ea composite taolo mofuta).
a. Mochine oa ho laola mofuta o tobileng oa mochine o ka laolang khatello ea ho sebetsa ea tanka ea metsi a seretse ka ho fetola lebelo la pompo ea seretse kapa ho lokisa ho buleha ha valve ea ho laola metsi a seretse. Mokhoa ona oa ho laola o bonolo ebile o bonolo, mme sekhahla sa ho hloleha se tlase.
b. Mochini oa ho jara lipeipi tse sa tobang ka tsela e sa tobang o fetola khatello e sebetsang ea tanka ea metsi a seretse ka ho fetola khatello ea tanka ea moea. Mokhoa ona oa ho laola o na le karabelo e hlokolosi le ho nepahala ha taolo e phahameng.
1. The automatic control air cushion e ka fana ka ts'ehetso e nepahetseng bakeng sa sefahleho sa kotopo, e le ho etsa bonnete ba tšireletseho ea ho khanna kotopo ka tekanyo e kholo ka ho fetisisa.
2. Tunneling e ka boela ea etsoa ha khatello ea metsi e ka holimo ho 15bar.
3. Sebelisa seretse e le mokhoa o ka sehloohong oa ho leka-lekanya khatello ea sebopeho holim'a ho cheka holim'a kotopo, 'me u ntše slag ka mokhoa oa ho tsamaisa seretse.
4. NPD letoto la phala jacking mochine o loketse bakeng sa kaho ea kotopo e nang le khatello e phahameng ea metsi le litlhoko tse phahameng tsa ho lula fatše.
5. Mokhoa o phahameng oa ho khanna, o bolokehileng le o ka tšeptjoang, o nang le mekhoa e 'meli ea ho leka-lekana ea ho laola ka ho toba le ho laola ka tsela e sa tobang.
6. The NPD letoto la lihlooho tse phala jacking mochini le e tsoetseng pele le e ka tšeptjoang seha hlooho moralo le ho potoloha seretse.
7. Mochini oa ho jara liphaephe tsa NPD letoto la liphaephe li amohela li-bearings tse ka tšeptjoang, tiiso e ka sehloohong ea koloi le mochine o fokotsang koloi, ka bophelo bo bolelele ba tšebeletso le ntlha e phahameng ea tšireletso.
8. Tsamaiso ea software e ikemetseng ea ho laola, ts'ebetso ea mochine oohle e bolokehile ebile e ka tšeptjoa, 'me ts'ebetso e loketse.
9. Mobu o fapaneng o sebelisoang ka bongata, joalo ka mobu o bonolo, letsopa, lehlabathe, mobu oa lehlohlojane, mobu o thata, o ka morao, joalo-joalo.
10. Ente ea metsi e ikemetseng, tsamaiso ea ho ntša metsi.
11. Lebelo le lebelo ka ho fetisisa ke hoo e ka bang 200mm ka motsotso.
12. Kaho ea ho nepahala ho phahameng, ho tsamaisa mohlomong ho ea holimo, ho theoha, ho le letšehali le ka ho le letona, le lehlakoreng le leholo ka ho fetisisa la ho tsamaisa likhato tse 5,5.
13. Sebelisa tsamaiso e bohareng ea taolo fatše, e bolokehileng, e utloahalang, le e loketseng.
14. Letoto la litharollo tse entsoeng ka mokhoa o hlophisitsoeng li ka fanoa bakeng sa litlhoko tse fapaneng tsa morero.