TR308H ke mochini oa khale oa ho cheka oa boholo bo mahareng o nang le melemo ea moruo le e sebetsang hantle, hammoho le bokhoni bo matla ba ho phunya mafika; Haholo-holo a loketse bakeng sa kaho ea mahareng-boholo bo lekaneng qubu motheo East China, China Bohareng le ka Boroa-bophirimela China.
MOHOLO O MOCHA oa ho cheka ROTARY
- Theknoloji ea taolo ea motlakase TSOHLE
Moralo o mocha oa theknoloji ea pele ea indasteri ea taolo ea motlakase, e laoloang ke mats'oao a motlakase nakong eohle ea ts'ebetso, e senya mokhoa oa khale oa taolo ea lisebelisoa tsa ho cheka ka rotary, 'me e na le melemo ea tekheniki ea moloko o moholo.
- Ntlafatso ea karolo ea mantlha
Sebopeho se secha sa sebopeho sa koloi; Chassis ea morao-rao ea Carter rotary excavator; Moloko o mocha oa lihlooho tsa motlakase, liphaephe tsa ho phunya tse matla tse thata haholo; likarolo tsa haeteroliki joalo ka lipompo tsa mantlha le li-motor kaofela li na le phallo e kholo.
- Ho beha maemo a phahameng
E tataisoa ke tlhoko ea matšoao 'me e tataisoa ke boqapi ba mahlale, e maemong a ho nts'etsapele metjhini ea boleng bo holimo ea pile foundation ho rarolla mathata a ts'ebetso e tlase ea kaho, litšenyehelo tse phahameng tsa kaho le tšilafalo e matla ea li-rigs tse tloaelehileng tsa ho cheka, le ho fana ka lihlahisoa tsa boleng bo holimo. bakeng sa likhoebo tsa kaho.
- Litharollo tse bohlale
E boemong ba ho fa bareki litharollo tsa kaho ka kakaretso, haholo-holo maemong a rarahaneng a kopo le maemo a jeoloji, ho ntlafatsa lekeno la kaho la merero ea kaho le ho fihlela tšebelisano-'moho le bareki. Lemoha tšebelisano-'moho le bareki.
| Mekhahlelo e ka sehloohong | Paramethara | Yuniti |
| Phula | ||
| Max. bophara ba ho phunya | 2500 | mm |
| Max. botebo ba ho cheka | 90/95 | m |
| Rotary drive | ||
| Max. torque ea tlhahiso | 300 | KN-m |
| Lebelo la rotary | 6-23 | rpm |
| Tsamaiso ea bongata | ||
| Max. bongata ba batho | 290 | KN |
| Max. ho hula ka matla | 335 | KN |
| Stroke ea tsamaiso ea bongata | 6000 | mm |
| Winche e ka sehloohong | ||
| Ho phahamisa matla (karolo ea pele) | 320 | KN |
| Mohala-thapo bophara | 36 | mm |
| Ho phahamisa lebelo | 65 | m/m |
| Winche e thusang | ||
| Ho phahamisa matla (karolo ea pele) | 110 | KN |
| Mohala-thapo bophara | 20 | mm |
| Mast tšekamelo ea angle | ||
| Ka ho le letshehadi/ka ho le letona | 6 | ° |
| Tsoela pele | 5 | ° |
| Khase | ||
| Mohlala oa chassis | Tlhaloso: CAT345GC | |
| Moetsi oa enjene | 卡特彼勒CAT | MOTSAMAI |
| Mohlala oa enjene | C-9.3 | |
| Matla a enjene | 263 | KW |
| Matla a enjene | 1750 | rpm |
| Chassis ka kakaretso bolelele | 5860 | mm |
| Latela bophara ba lieta | 800 | mm |
| Matla a hohelang | 680 | KN |
| Ka kakaretso mochine | ||
| Bophara ba ho sebetsa | 4300 | mm |
| Bophahamo ba ho sebetsa | 24288 | mm |
| Bolelele ba lipalangoang | 17662 | mm |
| Bophara ba lipalangoang | 3000 | mm |
| Bophahamo ba lipalangoang | 3682 | mm |
| Boima bo felletseng (ka kelly bar) | 93 | t |
| Boima bo felletseng (ntle le kelly bar) | 79 | t |
Litlhaloso tsa bar e tloaelehileng ea Kelly
Friction Kelly bar: ∅508-6*16.5
Interlock Kelly bar: ∅508-4*16.5
